Bifold door hanging in Andover
Specialist installation, re-hanging, alignment and repair for aluminium, uPVC and timber bifold sets across Andover and the south of England.
- Local specialists covering Andover
- Free, no-obligation quotes
- Schüco, ID Systems, Smart Visofold & more
- New installs, repairs & re-hangs
Bifold door hanging in Andover — at a glance
Bifold Door Hanging provides specialist bifold door installation, re-hanging, alignment and repair in Andover and across the south of England. We work on aluminium, uPVC and timber systems including Schüco, ID Systems, Smart Visofold, Reynaers and more. Quotes are free and fixed in writing. All enquiries are handled through the on-page quote form — there is no phone number or email to call.
- Service:
- Bifold door install, repair and re-hang
- Area:
- Andover, the south of England
- Materials:
- Aluminium, uPVC, timber
- How to enquire:
- Quote form on this page
Bifold door specialists who actually live in the detail — covering Andover
Most of the bifold calls we take from Andover sound the same: the door used to glide, now it drags. With Edwardian semis, coastal bungalows and modern rear extensions across the area, settlement and seasonal movement do their worst — and a generalist with the wrong shims just makes it worse.
Most weeks our diaries around Andover are split between brand-new supply-and-fit jobs on loft and balcony bifold sets, and repair calls on tired sets fitted years ago by builders who treated a folding door like an oversized French door. Both jobs need the same thing: patience, the right shims and an obsessive feel for level.
Where we work in Andover
We fit and repair bifolds across a wide spread of property types around Andover — from loft and balcony bifold sets, patio replacements where old French doors used to be, internal room dividers in open-plan flats through to rear elevation replacements on 1930s semis. Edwardian semis, coastal bungalows and modern rear extensions all bring their own quirks, and we adjust the install accordingly rather than forcing one method onto every reveal.
Common bifold problems we see around Andover
- water pooling on the inside of the threshold
- a stiff or unresponsive shootbolt
- doors that won't fold flat against the wall
- a draughty close where the brushes have worn flat
- panels that scrape each other as they fold
- condensation between glass panes on a sealed unit
If any of that sounds familiar, don't replace the whole door. Most of these are an hour or two of careful work with the right parts.
Systems we work with
We're system-agnostic and confident across every major aluminium and uPVC bifold brand on the UK market, including Schüco, ID Systems, Smart Visofold, Reynaers, Liniar and Aluk. If you've inherited a set and don't know the make, send a couple of photos through the quote form and we'll identify it.
How a job runs, start to finish
- A
Survey & diagnosis
We measure the reveal, check the cill for level, and identify exactly which component is at fault — track, roller, hinge, gearbox or seal.
- B
Fixed quote in writing
You get a clear, itemised price before we lift a tool. No drip-pricing, no 'while we're here' surprises.
- C
Specialist parts only
We use OEM rollers, hinges and gaskets matched to your specific system — not a generic bag-of-bits from the van.
- D
Clean install or repair
Dust sheets down, vacuum on, doors tested through a full fold cycle before we sign off.
- E
Aftercare
Written workmanship guarantee, plus a simple care sheet so the doors stay smooth for years.
What customers around Andover say
"Had a new aluminium set fitted as part of a kitchen extension in Andover. Arrived when they said they would, took the time to get the cill perfectly level, and the doors glide like silk. Properly impressed."
"Got three quotes for a re-hang in Andover. The other two wanted to replace the whole set; this lot fixed it for a fraction of the price and explained exactly what they were doing as they went."
"I sub the bifold install out on most of my extensions. Honest pricing, clean work and they don't try to upsell my clients. That's all I ask for."
Frequently asked questions — Andover
+My bifold is draughty and lets water in — can it be fixed without replacing it?
Almost always, yes. Worn brush seals along the leaf edges and a flattened gasket at the cill are the usual cause — both are replaceable parts. We also check the drainage slots in the threshold haven't blocked, which is a very common issue in the south of England after a few wet winters. Full reseal and re-align is a half-day job in most Andover homes.
+What's the workmanship guarantee?
Every Andover install and repair carries our written workmanship guarantee covering alignment, sealing and locking gear. Supply-and-fit jobs also get the full manufacturer warranty on the door system itself (typically 10 years on aluminium frames and 5 years on moving parts, depending on brand).
+How long does a bifold installation take in Andover?
A straight swap into an existing opening on a typical Andover property is a single day on site. Where Edwardian semis are involved, expect closer to a day and a half because the reveal almost always needs squaring before the track goes down. Brand-new openings with structural work, or very wide 5+ leaf sets, run to two or three days. You get a realistic timeline at survey — never a guess.
+How wide can a bifold run go on a Andover extension?
For aluminium systems on the kind of Edwardian semis we see across Andover, 6m–7m across 5 or 6 leaves is comfortable territory. Beyond that you're into commercial-grade frames or splitting the run with a fixed corner post. We'll spec the system at survey to match the opening — leaf weight and head deflection matter more than the headline maximum.
+Why won't my bifold lock properly any more?
Usually the shootbolt isn't reaching its keep because the leaves have dropped by a few millimetres — so the bolt strikes the edge of the keep instead of dropping into it. On Andover jobs we re-align the leaves first, then re-position the keeps. If the gearbox itself has failed we replace it as an OEM part, not a generic.
+Aluminium, uPVC or timber — what suits a Andover home?
For most the south of England properties — especially the Edwardian semis we see across Andover — aluminium is the right call: slim sightlines, strong enough for wide 4–6 leaf runs, and almost zero maintenance. uPVC makes sense on narrower 2–3 leaf openings where budget matters more than sightlines. Timber is the choice for character properties (conservation areas, period extensions) but expect to re-finish every few years.
Book a Andover bifold specialist
Tired of water pooling on the inside of the threshold? We fix that exact problem in Andover — usually in a single visit. Send a few details through the form and a local specialist will confirm availability and a fixed, written price. No phone calls, no hard sell.
Request my free surveyReady for a quote in Andover?
Send a few details using the form and a Andover bifold specialist will come back with availability and a fair, fixed price. No pressure, no pushy follow-ups.