Bifold door hanging in Brighton and Hove
Specialist installation, re-hanging, alignment and repair for aluminium, uPVC and timber bifold sets across Brighton and Hove and the south of England.
- Local specialists covering Brighton and Hove
- Free, no-obligation quotes
- Aluk, Reynaers, Solarlux & more
- New installs, repairs & re-hangs
Bifold door hanging in Brighton and Hove — at a glance
Bifold Door Hanging provides specialist bifold door installation, re-hanging, alignment and repair in Brighton and Hove and across the south of England. We work on aluminium, uPVC and timber systems including Aluk, Reynaers, Solarlux, SunSeeker and more. Quotes are free and fixed in writing. All enquiries are handled through the on-page quote form — there is no phone number or email to call.
- Service:
- Bifold door install, repair and re-hang
- Area:
- Brighton and Hove, the south of England
- Materials:
- Aluminium, uPVC, timber
- How to enquire:
- Quote form on this page
Bifold door specialists who actually live in the detail — covering Brighton and Hove
If you've just had a new bifold delivered to a home in Brighton and Hove, the install is what makes or breaks it. We work exclusively on folding-sliding systems, and we know how Edwardian semis, coastal bungalows and modern rear extensions behave once a heavy aluminium track sits on top of them.
Most weeks our diaries around Brighton and Hove are split between brand-new supply-and-fit jobs on internal room dividers in open-plan flats, and repair calls on tired sets fitted years ago by builders who treated a folding door like an oversized French door. Both jobs need the same thing: patience, the right shims and an obsessive feel for level.
Where we work in Brighton and Hove
We fit and repair bifolds across a wide spread of property types around Brighton and Hove — from internal room dividers in open-plan flats, side-return extensions on Victorian terraces, rear kitchen extensions opening onto the garden through to rear elevation replacements on 1930s semis. Edwardian semis, coastal bungalows and modern rear extensions all bring their own quirks, and we adjust the install accordingly rather than forcing one method onto every reveal.
Common bifold problems we see around Brighton and Hove
- a top guide that's worked loose from the head track
- leaves that drag along the bottom track
- a handle that won't lift far enough to throw the lock
- doors that won't fold flat against the wall
- stiff intermediate hinges that need re-greasing or replacing
- a stiff or unresponsive shootbolt
If any of that sounds familiar, don't replace the whole door. Most of these are an hour or two of careful work with the right parts.
Systems we work with
We're system-agnostic and confident across every major aluminium and uPVC bifold brand on the UK market, including Aluk, Reynaers, Solarlux, SunSeeker, Kestrel and ID Systems. If you've inherited a set and don't know the make, send a couple of photos through the quote form and we'll identify it.
How a job runs, start to finish
- A
Survey & diagnosis
We measure the reveal, check the cill for level, and identify exactly which component is at fault — track, roller, hinge, gearbox or seal.
- B
Fixed quote in writing
You get a clear, itemised price before we lift a tool. No drip-pricing, no 'while we're here' surprises.
- C
Specialist parts only
We use OEM rollers, hinges and gaskets matched to your specific system — not a generic bag-of-bits from the van.
- D
Clean install or repair
Dust sheets down, vacuum on, doors tested through a full fold cycle before we sign off.
- E
Aftercare
Written workmanship guarantee, plus a simple care sheet so the doors stay smooth for years.
What customers around Brighton and Hove say
"I sub the bifold install out on most of my extensions. Honest pricing, clean work and they don't try to upsell my clients. That's all I ask for."
"Had a new aluminium set fitted as part of a kitchen extension in Brighton and Hove. Arrived when they said they would, took the time to get the cill perfectly level, and the doors glide like silk. Properly impressed."
"One of my rentals in Brighton and Hove had a bifold that wouldn't lock. Two other firms said it needed replacing. These guys diagnosed a worn gearbox in ten minutes and had it sorted the same week."
Frequently asked questions — Brighton and Hove
+Do you cover Brighton and Hove and the surrounding villages?
Yes — Brighton and Hove itself and the wider the south of England postcode area. If you're in a smaller village or hamlet just outside Brighton and Hove and not sure, drop your postcode into the quote form and we'll confirm before quoting.
+Do you fit bifold doors I've bought myself?
Yes — a good share of the Brighton and Hove jobs we take on are client-supplied. Origin, Smart Visofold and Visoglide, Schüco, Reynaers, Sunflex, ID Systems — all fine. We inspect on arrival, check the leaf count and handing against your opening, and flag anything (missing trickle vents, wrong threshold, damaged corner joints) before we start cutting.
+My bifold is draughty and lets water in — can it be fixed without replacing it?
Almost always, yes. Worn brush seals along the leaf edges and a flattened gasket at the cill are the usual cause — both are replaceable parts. We also check the drainage slots in the threshold haven't blocked, which is a very common issue in the south of England after a few wet winters. Full reseal and re-align is a half-day job in most Brighton and Hove homes.
+Why does my bifold drag along the bottom track?
It's almost always one of three things: collapsed bottom rollers (the bearings have failed), the master leaf has dropped on its hinges, or the track itself has bowed because the cill underneath isn't fully packed. On Edwardian semis around Brighton and Hove the cill issue is the most common — the timber sub-frame compresses over a winter and the whole track sags. Re-pack, re-shim, fresh rollers and it glides again.
+Why won't my bifold lock properly any more?
Usually the shootbolt isn't reaching its keep because the leaves have dropped by a few millimetres — so the bolt strikes the edge of the keep instead of dropping into it. On Brighton and Hove jobs we re-align the leaves first, then re-position the keeps. If the gearbox itself has failed we replace it as an OEM part, not a generic.
+Aluminium, uPVC or timber — what suits a Brighton and Hove home?
For most the south of England properties — especially the Edwardian semis we see across Brighton and Hove — aluminium is the right call: slim sightlines, strong enough for wide 4–6 leaf runs, and almost zero maintenance. uPVC makes sense on narrower 2–3 leaf openings where budget matters more than sightlines. Timber is the choice for character properties (conservation areas, period extensions) but expect to re-finish every few years.
Book a Brighton and Hove bifold specialist
Tired of a top guide that's worked loose from the head track? We fix that exact problem in Brighton and Hove — usually in a single visit. Send a few details through the form and a local specialist will confirm availability and a fixed, written price. No phone calls, no hard sell.
Request my free surveyReady for a quote in Brighton and Hove?
Send a few details using the form and a Brighton and Hove bifold specialist will come back with availability and a fair, fixed price. No pressure, no pushy follow-ups.